- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
English 
Main technical parameters
| Main technical parameters | unit | specification | |||
| Table area | mm | 600*300 | |||
| Maximum left and right movement | mm | 600 | |||
| Maximum amount of movement before and after | mm | 300 | |||
| Maximum distance from table to spindle center | mm | 540 | |||
| Maximum weight of table | kg | 350 | |||
| Flat gloss | R0.25 | ||||
| Table T-slot | mm*N | 14*1 | |||
| Table speed | m/min | 5--23 | |||
| Front and rear hand wheel feed | 1 grid | mm | 0.02 | ||
| Front and rear hand wheel feed | 1 lap | mm | 4 | ||
| Automatic feed front and rear | mm | 0.1-8 | |||
| Dart back and forth | 50HZ | mm/min | 790 | ||
| 60HZ | mm/min | 950 | |||
| Grinding wheel size | Outside diameter x width x inside diameter | mm | ø355*20~40*127 | ||
| Spindle speed | 50HZ | R.P.M | 1450 | ||
| Spindle speed | 60HZ | R.P.M | 1740 | ||
| Upper and lower hand wheel feed | 1 grid | mm | 0.01 | 0.001 | |
| 1 lap | mm | 2 | 0.5 | ||
| Automatic feed rate | mm | / | 0.005-0.025 | ||
| Rapid up and down movement | mm/min | / | 130 | ||
| Spindle motor | HxP | 5*4 | |||
| Up and down drive motor | HxP | / | 80W | ||
| Hydraulic motor | HxP | 2*4 | |||
| Flush motor | HxP | 1/8*2 | |||
| Front and rear drive motor | HxP | 40W | |||
| Machine height | mm | 1830 | |||
| Floor space | mm | 3500*2500 | |||
| Weight (approximate) | kg | 2100 | |||
3060AHR Parts list
| Accessories name and specification | quantity |
| Cooling water tank | 1 |
| Electromagnetic chuck300*600mm | 1 |
| Grinding wheel350*40*127 | 1 |
| Grinding wheel balance rack/balance bar | 1 |
| Flange and flange wrench | 1 |
| Hydraulic system | 1 |
| Countertop wheel dresser | 1 |
| Dual-purpose wrench | 1 |
| Machine pad | 4 |
| Up and down quick function | 1 |
| Adjustable disk controller | 1 |
| Standard tools and toolboxes | 1 |
| User manual | 1 |
Main technical parameters
| Main technical parameters | unit | specification | |||
| Table area | mm | 600*300 | |||
| Maximum left and right movement | mm | 600 | |||
| Maximum amount of movement before and after | mm | 300 | |||
| Maximum distance from table to spindle center | mm | 540 | |||
| Maximum weight of table | kg | 350 | |||
| Flat gloss | R0.25 | ||||
| Table T-slot | mm*N | 14*1 | |||
| Table speed | m/min | 5--23 | |||
| Front and rear hand wheel feed | 1 grid | mm | 0.02 | ||
| Front and rear hand wheel feed | 1 lap | mm | 4 | ||
| Automatic feed front and rear | mm | 0.1-8 | |||
| Dart back and forth | 50HZ | mm/min | 790 | ||
| 60HZ | mm/min | 950 | |||
| Grinding wheel size | Outside diameter x width x inside diameter | mm | ø355*20~40*127 | ||
| Spindle speed | 50HZ | R.P.M | 1450 | ||
| Spindle speed | 60HZ | R.P.M | 1740 | ||
| Upper and lower hand wheel feed | 1 grid | mm | 0.01 | 0.001 | |
| 1 lap | mm | 2 | 0.5 | ||
| Automatic feed rate | mm | / | 0.005-0.025 | ||
| Rapid up and down movement | mm/min | / | 130 | ||
| Spindle motor | HxP | 5*4 | |||
| Up and down drive motor | HxP | / | 80W | ||
| Hydraulic motor | HxP | 2*4 | |||
| Flush motor | HxP | 1/8*2 | |||
| Front and rear drive motor | HxP | 40W | |||
| Machine height | mm | 1830 | |||
| Floor space | mm | 3500*2500 | |||
| Weight (approximate) | kg | 2100 | |||
3060AHR Parts list
| Accessories name and specification | quantity |
| Cooling water tank | 1 |
| Electromagnetic chuck300*600mm | 1 |
| Grinding wheel350*40*127 | 1 |
| Grinding wheel balance rack/balance bar | 1 |
| Flange and flange wrench | 1 |
| Hydraulic system | 1 |
| Countertop wheel dresser | 1 |
| Dual-purpose wrench | 1 |
| Machine pad | 4 |
| Up and down quick function | 1 |
| Adjustable disk controller | 1 |
| Standard tools and toolboxes | 1 |
| User manual | 1 |
