| Product model |
| 5M |
| dimension | Table size | 1370*305MM |
| Travel | Left and right stroke（X） | 800MM |
| Front and rear stroke（Y） | 400MM |
| Up and down stroke（Z） | 380MM |
| Arm reach | 600MM |
| Distance from spindle end face to table surface | 50-480MM |
| Principal axis coefficient | Spindle taper | NT40 |
| Spindle speed | 80-5440RPM(16-speed) |
| Spindle travel | 127MM |
| Spindle horse power | 5HP |
| Milling head | Milling head tilt Angle | 45° front and back |
| Machine profile dimensions | T-slot (Number * Size * Spacing) | 3-15.88*65MM |
| Machine size (L * W * H)（MM） | 2000*1900*2500MM |
| Approximate machine weight | 1680kgs |
| Configurations | Accessories and specification | quantity |
| Standard parts for machine tools | 1、Hand oil pump | 1 |
| 2、Work light | 1 |
| 3、Organ board + protective glue | 1 |
| 4、Lever | 1 |
| 5、Tools and toolboxes | 1 |
| 6、Operating instruction | 1 |
| Special parts for machine tools | 7、Two axis electronic ruler | 1 |
| 8、 X-axis automatic feed | 1 |
| 9、 6 "flat pliers | 1 |
| 10、Clamp plate | 1 |
| 11、 chuck | 1 |
| Z axis automatic lifting device | 1 |
| Water pan, water pump device | 1 |
English
